MMDVM Hotspot Spot Radio WiFi Digital Voice Modem Work with UHF VHF Ethernet Cable Support C4FM YSF NXDN DSTAR P25 DMR

MMDVM Hotspot Spot Radio WiFi Digital Voice Modem Work with UHF VHF Ethernet Cable Support C4FM YSF NXDN DSTAR P25 DMR

    Features:

  • SUPPORT: C4FM YSF NXDN DSTAR P25 DMR and default work with UHF. If you can’t set up correctly or connect to the network, please feel free to contact us via email, we will reply within 24 hours. Or you may visit the github group for solution.More product setup guide, please read the product manual or contact us, we will reply within 24 hours.
  • EASY SET UP: Preload sofeware Pi-Star on TF card, no need to download again. Radio Frequency: (UHF:430-440,VHF:144-146) This is upgraded version, do not need to set RXOFFSET and TXOFFSET, they’re default 0.
  • WIFI SSID: Need the 2.4GHz SSID as the Pi Zero W doesn’t support 5.8GHz.and WiFi will not work with WEP, make sure your WiFi Password Type is WPA. Power on the hotspot for 2 minutes to automatically connect to the network, or follow the instructions to connect the Hotspot to your router. After power on 2 minutes,goto http://pi-star/admin/configure.php
  • EASY CHARGING: Free micro USB charging cable included, charged with power bank or connect to laptop or computer. The Hotspot will also work mobile in your vehicle if you tether it to your mobile phone network.
  • NOTE: Not compatible with Baofeng UV-5R, Baofeng RD-5R, 5X, 5R+, 5R Plus, etc UV series, BF series. More product setup guide, please read the product manual or contact us, we will reply within 24 hours.

AURSINC MMDVM Hotspot Board + Antenna Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for Raspberry Pi-Zero W, Pi 3

AURSINC MMDVM Hotspot Board + Antenna Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for Raspberry Pi-Zero W, Pi 3

    Features:

  • Support UHF VHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur radio brand license restrictions)
  • Support Raspberry Pi 3B, 3B +, Pi ZERO, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or Bluetooth model)
  • Save electricity, High quality TCXO, stable, low BER.
  • Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG
  • Support online upgrade, User-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules

MMDVM Spot Radio Station Support C4FM YSF NXDN DSTAR P25 DMR Hotspot (Complete_Hotspot_UHF/VHF)

MMDVM Spot Radio Station Support C4FM YSF NXDN DSTAR P25 DMR Hotspot (Complete_Hotspot_UHF/VHF)

    Features:

  • X➸ Not compatible with Baofeng UV-5R, Baofeng RD-5R, 5X, 5R+, 5R Plus, etc UV series, BF series
  • ✔➸ Support: YSF, D-STAR, P25, DMR and work with UHF, Suit for Raspberry Pi 3,Raspberry Pi Zero W
  • ✔➸ Set the same Freq, Callsign, DMR ID, Color code, Repeater Slot as Radio Mobile, WIFI Need the 2.4GHz SSID as the Pi Zero W doesn’t support 5.8GHz
  • ✔➸ Power supply: Mobile charger or a USB cable connected to your computer or laptop. The Hotspot will also work mobile in your vehicle if you Tether it to your mobile phone network.
  • X➸ Not working on VHF, VHF requires external inductor.

AURSINC MMDVM Hotspot Board +OLED+ Antenna Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for Raspberry Pi-Zero W, Pi 3

AURSINC MMDVM Hotspot Board +OLED+ Antenna Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for Raspberry Pi-Zero W, Pi 3

    Features:

  • Support UHF VHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur radio brand license restrictions)
  • Support Raspberry Pi 3B, 3B +, Pi ZERO, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or Bluetooth model)
  • Save electricity, High quality TCXO, stable, low BER.
  • Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG
  • Support online upgrade, User-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules

MMDVM Hotspot Board + Aluminium Case Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for Raspberry Pi-Zero W, Pi 3

MMDVM Hotspot Board + Aluminium Case Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for Raspberry Pi-Zero W, Pi 3

    Features:

  • Save electricity, High quality TCXO, stable, low BER. Note: This is NOT a completed or assembled Hotspot, it is just MMDVM Board with Aluminum case.
  • Support Raspberry Pi 3B, Pi ZERO, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or Bluetooth model)
  • Support VHF/UHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur radio brand license restrictions)
  • Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG
  • Support online upgrade, User-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules

Haude MMDVM Duplex RX TX UHF VHF Hotspot Support P25 DMR YSF NXDN DMR Slot 1+ Slot 2 for Raspberry Pi

Haude MMDVM Duplex RX TX UHF VHF Hotspot Support P25 DMR YSF NXDN DMR Slot 1+ Slot 2 for Raspberry Pi

    Features:

  • High performance 32-bit ARM processor. Fully assembled and tested
  • Up to 10mW RF power.SMA antenna connector, UHF/VHF antenna included
  • Supports DMR, P-25, D-Star and System .Onboard LEDs to show status (Tx, Rx, PTT, Mode)
  • Mounts cleanly on all current Raspberry Pi’s including the Pi Zero
  • The firmware is pre-loaded and is easily upgraded via software.

Fauge MMDVM Duplex RX TX UHF VHF Hotspot Support P25 DMR YSF NXDN DMR Slot 1+ Slot 2 for Raspberry Pi

Fauge MMDVM Duplex RX TX UHF VHF Hotspot Support P25 DMR YSF NXDN DMR Slot 1+ Slot 2 for Raspberry Pi

    Features:

  • High performance 32-bit ARM processor. Fully assembled and tested
  • Up to 10mW RF power.SMA antenna , UHF/VHF antenna included
  • Supports DMR, P-25, D-Star and System .Onboard LEDs to show status (Tx, Rx, PTT, Mode)
  • Mounts cleanly on all current Raspberry Pi’s including the Pi Zero
  • The firmware is pre-loaded and is easily upgraded via software.

Binchil MMDVM Duplex RX TX UHF VHF Hotspot Support P25 DMR YSF NXDN DMR Slot 1+ Slot 2 + OLED for Raspberry Pi

Binchil MMDVM Duplex RX TX UHF VHF Hotspot Support P25 DMR YSF NXDN DMR Slot 1+ Slot 2 + OLED for Raspberry Pi

    Features:

  • Up to 10mW RF power.SMA antenna , UHF/VHF antenna included
  • Supports DMR, P-25, D-Star and System
  • High performance 32-bit ARM processor.Fully assembled and tested
  • Onboard LEDs to show status (Tx, Rx, PTT, Mode)
  • Mounts cleanly on all current Raspberry Pi’s including the Pi Zero

Youmine MMDVM Duplex RX TX UHF VHF Hotspot Support P25 DMR YSF NXDN DMR Slot 1+ Slot 2 for Raspberry Pi

Youmine MMDVM Duplex RX TX UHF VHF Hotspot Support P25 DMR YSF NXDN DMR Slot 1+ Slot 2 for Raspberry Pi

    Features:

  • High performance 32-bit ARM processor. Fully assembled and tested
  • Mounts cleanly on all current Raspberry Pi’s including the Pi Zero
  • Supports DMR, P-25, D-Star and System .Onboard LEDs to show status (Tx, Rx, PTT, Mode)
  • Up to 10mW RF power.SMA antenna , UHF/VHF antenna included
  • The firmware is pre-loaded and is easily upgraded via software.

Davitu Module Board Raspberry Pi & Orange Pi – MMDVM DUPLEX RX TX UHF VHF Hotspot Support P25 DMR YSF NXDN DMR SLOT 1+ SLOT 2 + OLED for Raspberry Pi

Davitu Module Board Raspberry Pi & Orange Pi - MMDVM DUPLEX RX TX UHF VHF Hotspot Support P25 DMR YSF NXDN DMR SLOT 1+ SLOT 2 + OLED for Raspberry Pi

    Features:

  • Package Includes: 1x OLED display  | 1x MMDVM HotSPOT Module | 2x 433Mhz antenna  | 2x Pin | Some screws
  • · High performance 32-bit ARM processor
  • · Fully assembled and tested
  • · Supports DMR, P-25, D-Star and System Fusion
  • · Onboard LEDs to show status (Tx, Rx, PTT, Mode)

As an Amazon Associate I earn from qualifying purchases.

Random products:

napkin ring for easter
impact driver bit set