Topping EX5 MQA Dual ES9038Q2M DAC Bluetooth 5.0 LDAC DSD512 PCM 768kHz Hi-Res Audio HiFi Decoder Headphone Amplifier (Black)
- Dual ESS ES9038Q2M SABRE HIFI DAC Chips, MQA Full Decoding via USB
- Support DSD512 Native and PCM 768kHz, MQA Full Decoding via USB
- 2nd Generation 16 Core XMOS XU216, 4-PIN-XLR and 6.35mm Headphone Output
- THD+N as low as 0.00010%, 1300mW X2 Output Power
- DAC + Pre amp applicaion/ Bluetooth receiver/Tablet and phone DAC application
S.M.S.L SU-9 MQA Full Decoder ES9038PRO DAC XMOS DSD512 PCM768kHz/32Bit Bluetooth 5.0 UAT APTX-HD USB Balanced Decoder
- Complete support of LDAC,APTX/HD,XBC,AAC, and the exquisite 24bit/192kHz UAT format
- Apart from ES9038 flagship DAC we coupled this DAC with ES9311 power chip designed for ESS DACS to optimize ES9038 performance to its max potential.
- All digital inputs support DSD decoding. DoP64 is supported through coaxial and optic.
- The power source is implemented with shielded low noise conditioner. This improves both sound quality and power efficiency.
- UAT (Ultra Audio Transmission), an audio coding technology self-developed by HiBy with up to 192kHz sampling frequency or up to 1.2Mbps bit rate. There are three available settings: high 1.2Mbps/medium 900 kbps/low 600 kbps.
Topping D90SE MQA DAC Full Balanced DAC ES9038PRO DSD1024 PCM32bit/768kHz USB/Coax/Opt/AES/IIS Desktop Bluetooth Audio Decoder (Silver)
- ▶MQA DAC: D90se is a new D90 decoder with better performance and wider support for MQA. OPT, COAX, USB and AES can support MQA rendering and decoding.
- ▶Bluetooth 5.0 LDAC transmission: D90SE has the certification of hi-res Audio Wireless and LDAC. It uses CSR8675 chipset to support LDAC/AAC/SBC/APTX/APTX LL/APTX HD protocol. To get even better sound quality from Bluetooth, we abandon the built-in DAC of CSR8675 and connect it’s digital signal to ES9038PRO to decode.
- ▶Selectable output: D90SE has balanced XLR output and single ended RCA output. You can choose ” XLR only” “RCA only” or “XLR + RCA ” output to for different applications.
- ▶Plug and play: D90SE has a wide range of compatibility, Windows 10, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications,you need to install the driver and set it up.
- ▶A90 will be the best headphone amplifier for D90SE: Full balanced NFCA module, 0.2uV ultra low noise. 0.00006% ultra low THD + N0.1 ohm output impedance, wide gain setting high output voltage, almost suitable for driving all kinds of headphones.
S.M.S.L M400 Supports MQA decoding Second XMOS XU216 AK4499 Chip Bluetooth 5.0 DSD512 32Bit/768kHz Fully balaced Output High-Resolution Hi-end Audio DAC
- Flagship DAC chip AK4499, the audio industry’s highest performance.
- The latest Bluetooth supports APTX/HD, SBC, AAC and the industry’s highest specification 24bit/192kHz UAT format!
- Support MQA full decode ! No matter where you are, it ’s like being on the scene.
- USB uses the second XMOS XU216,support native DSD and 32bit 768kHz!
- Support LVDS level differential I2 S reception (using HDMI interface), it can accept the lowest jitter digital audio!
HELM Audio Bolt DAC/AMP, USB-C Portable High-End DAC/Headphone Amplifier with MQA Playback. Mobile Studio Sound for Android, iOS and PC. USB-C to 3.5mm Audio, THX Certified
- STUDIO GRADE PORTABLE DIGITAL ANALOG CONVERTOR WITH MQA: BOLT delivers studio sound on the go from any mobile device across all listening formats. Supports MQA (Master Quality Authenticated) streaming for unparalleled fidelity in portable audio. Compatible with Android, iOS, Mac, and PC’s. May require extra adapters or third party apps for MQA support.
- HIGHEST FIDELITY SOUND: MQA (Master Quality Authenticated) rendering “unfolds” every detail of the original master recording as the artist and engineers intended it to be heard for better-than-CD audio resolutions. Stream MQA content from TIDAL, nugs.net, and Xiami. MQA Certified.
- SMARTPHONE, TABLET, MAC & PC COMPATIBLE: USB-C input to a 3.5mm Headphone Output supporting playback of PCM files with sampling rates up to 384 kHz, or DSD files with sampling frequencies up to 5.6MHz. The 3.5mm audio jack seamlessly connects to your wired headphones or speaker system. Note: An adapter is required if you do not have a 3.5mm input jack.
- AMPLIFIED AUDIO OUTPUT & HEADPHONE OUTPUT LEVEL MATCHING: Provides an average increase of +6 dB in devices with combined USB-audio output (where a dedicated headphone audio output isn’t available). Headphone output level automatically detects headphone impedance and sets level accordingly (1V for 150 ohms).
- THX CERTIFIED AUDIO OUTPUT: Exclusively designed for ultra-low harmonic, crosstalk & crossover distortion. Unlike other mobile MQA-DAC designs, the HELM BOLT physically isolates the DAC from the USB connector for improved EMI isolation, and uses a three oscillator design for superior frequency lock with dramatic improvements over single oscillator DAC designs.
LOXJIE D50 Audio DAC Supports MQA Decoding, AK4499EQ Chip Hi-Res APT-X Bluetooth5.0 XMOS DSD512 PCM 32bit/768kHz, USB/Optical Fiber/Coaxial Cable Input with Remote Control
- Flagship chip AK4499EQ.
- Support MQA music full decoding.
- Excellent Performance Data – Using APx555B audio analyzer to measure: the distortion of D50 is as high as 0.000068%, the SNR reaches 131dB, and the dynamic range also goes to 131dB.
- Listen to the Most Authentic Sound – Distortion(A-WTD) as low as 0.000058%(-124dB). Engineers’ persistent pursuit of technology allows D50 to accurately convey the details of the sound. Excellent performance, high signal-to-noise ratio, low distortion. Support hard decoding DSD512, CM supports 32bit/768kz. Through excellent performance parameters, a real sound experience is established.
- Post-sales Service – It’s a great honor for you to notice our products, buying our product will get a one-year warranty. If you have any problems with our product, please contact our customer service to communicate, We will reply to you within 24 hours and give you a perfect solution.
S.M.S.L M500 DAC Headphone Amp Supports MQA decoding ES9038PRO D/A chip USB Uses XMOS XU-216 with Remote Control (Black)
- ♫ USB input supports MQA decoding
- ♫ M500 uses top performance ES9038PRO D/A chip from ESS Technology
- ♫ XMOS XU-216, true 32bit audio processing, supports DoP and Native DSD, and reaches 32bit/768kHz and DSD512
- ♫ Ultra-low phase noise and optimized clock processing circuit are used to achieve ultra-low clock jitter
- ♫ 3 high-end dual op-amps LME49720 are used. The M500 enables low noise density and low distortion for maximum dynamic range and provides high output drive capability
Gustard X26 Pro Full-Balanced MQA DAC Dual ES9038PRO LDAC USB/Coaxial/Optical/IIS XMOS HiFi Class A Decoder with Remote (Black)
- ♬ X26 Pro MQA DAC uses two ESS chip ES9038PRO for dual mono audio digital-to-analog conversion. Each channel uses a separate ES9038Pro chip, and each channel is completely independent power supply and grounding for best performance.
- ♬ Various Input and Output Mode: Gustard X26 Pro with USB/IIS/AES/Coaxial/Optical/Bluetooth 5.0(CSE8675)input mode; with RCA and XLR out to meet different needs. USB input support decoding MQA.
Topping D70s MQA DAC AK4497 Bluetooth5.0 LDAC DSD512 32Bit/768k AK4118 Receiver XMOS IIS USB Coax Opt AES lnput HiFi Audio Decoder with Remote Control (Silver)
- ♫ Topping D70s MQA DAC: It use 2x AK4497, 1xAK4118 receiver. D70s applies the CPLD. USB input support MQA decoding. It has USB Bluetooth IIS Coax OPT AES multiple lnputs. Remote to control.
- ♫ D70s uses 2nd generation 16 core XMOS XU216, USB supports up to PCM32bit/768khz, DSD512 native and MQA decode. A DAC better than 4497: THD + N of D70s is 0.0001% (-120db), already beat the AKM official spec of AK4497 (-116db).
- ♫ Bluetooth 5.0 LDAC transmission: D70s has the certification of Hi-res Audio Wireless and LDAC. It uses CSR8675 chipset to support LDAC/AAC/SBC/APTX/APTX LL/APTXHD protocol.
- ♫ Selectable output port: D70s has full balanced XLR output and single ended RCA output. You can choose “XLR only”, “RCA only” or “XLR + RCA ” output to meet different usage in the multiple systems.
- ♫ DAC filter mode: D70s capable of providing 6 filter modes under PCM decoding, 2 filtermodes under DSD decoding. It could be used as Bluetooth DAC, DAC + Pre amp or Pure DAC application.
Gustard DAC-X16 MQA USB DAC ES9068AS DAC MQA384kHz DSD512 PCM768kHz Full Balanced Bluetooth 5.0 Desktop Decoder with I2S/AES/Coax/Opt Input (Black)
- ► MQA USB DAC: GUSTARD DAC-X16 supports technology. Use 2 ESS company’s latest SABRE series dual-channel fever audio DA chip ES9068AS, this chip built-in Renderer hardware renderer function audio DA chip, can directly process SPDIF and I2S input first stage decoded digital audio signal , Reduce the external control signal interference when the DAC is working, so as to achieve the ideal playback.
- ► High Resolution Decoder: The USB processing module of GUSTARD DAC-X16 uses USB Audio dedicated chip XMOS XU216, and supports up to 384K, DSD512, PCM768K.
- ► Bluetooth 5.0 DAC: GUSTARD DAC-X16 is equipped with Bluetooth chip CSR8675, supports Bluetooth 5.0, supports LDAC, AAC, SBC, APTX multiple audio formats.
- ► CPLD Programmable Chip: GUSTARD DAC-X16 uses CPLD programmable logic chip to construct digital integrated circuits with logic functions by itself, with clock management, 2nd PLL digital shaping, Dop demodulation, PCM/DSD depop Switch and other exclusive technologies. Lay a solid foundation for excellent sound quality.
- ► Multiple Interfaces: The fully balanced decoder GUSTARD DAC-X16 supports USB/I2S/COAX/OPT/BT/AES input, and has two output modes: RCA single-ended output and balanced XLR input. It is a true fully balanced decoder.
As an Amazon Associate I earn from qualifying purchases.