Adafruit 4480 LSM6DS33 6-DoF Accel + Gyro IMU – Stemma QT/Qwiic

Adafruit 4480 LSM6DS33 6-DoF Accel + Gyro IMU - Stemma QT/Qwiic

    Features:

  • Add motion, direction and orientation sensing to your Arduino project with this all-in-one 9 Degree of Freedom (9-DoF) sensor with sensors from ST
  • The board includes an LSM6DS33, a 6-DoF IMU accelerometer + gyro.
  • The 3-axis accelerometer, can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating in 3D space.
  • The 3-axis gyroscope that can measure spin and twist. This chip isn’t the newest motion sensor, but it is well-established and comes at a great price.

Pololu AltIMU-10 v5 Gyro, Accelerometer, Compass, and Altimeter (LSM6DS33, LIS3MDL, (Item: 2739)

Pololu AltIMU-10 v5 Gyro, Accelerometer, Compass, and Altimeter (LSM6DS33, LIS3MDL, (Item: 2739)

    Features:

  • Uses newer MEMS sensors that provide some increases in accuracy compared to version 4
  • Each sensor also has a choice of output data rates
  • Ten independent rotation, acceleration, magnetic, and absolute pressure readings
  • Board includes a low-dropout linear voltage regulator that provides the 3.3 V required by the LSM6DS33, LIS3MDL, and LPS25H

MinIMU-9 v5 Gyro, Accelerometer, and Compass (LSM6DS33 and LIS3MDL Carrier)

MinIMU-9 v5 Gyro, Accelerometer, and Compass (LSM6DS33 and LIS3MDL Carrier)

    Features:

  • Operating voltage: 2.5 V to 5.5 V
  • Supply current: 5 mA
  • Output format (I²C): Gyro: one 16-bit reading per axis, Accelerometer: one 16-bit reading per axis, Magnetometer: one 16-bit reading per axis
  • Sensitivity range: Gyro: ±125, ±245, ±500, ±1000, or ±2000°/s, Accelerometer: ±2, ±4, ±8, or ±16 g, Magnetometer: ±4, ±8, ±12, or ±16 gauss

AltIMU-10 v5 Gyro, Accelerometer, Compass, and Altimeter (LSM6DS33, LIS3MDL, and LPS25H Carrier)

AltIMU-10 v5 Gyro, Accelerometer, Compass, and Altimeter (LSM6DS33, LIS3MDL, and LPS25H Carrier)

    Features:

  • Operating voltage: 2.5 V to 5.5 V
  • Supply current: 5 mA
  • Output format (I²C): Gyro: one 16-bit reading per axis, Accelerometer: one 16-bit reading per axis, Magnetometer: one 16-bit reading per axis, Barometer: 24-bit pressure reading (4096 LSb/mbar)
  • Sensitivity range: Gyro: ±125, ±245, ±500, ±1000, or ±2000°/s, Accelerometer: ±2, ±4, ±8, or ±16 g, Magnetometer: ±4, ±8, ±12, or ±16 gauss, Barometer: 260 mbar to 1260 mbar (26 kPa to 126 kPa)

As an Amazon Associate I earn from qualifying purchases.

Random products:

yamaha subwoofer for receiver
hoody for womens with zipper